Page 55 - Catalogo de Boquillas - Industrysystem

L

Low Flow

DESIGN FEATURES SPRAY CHARACTERISTICS
A series of small spiral nozzles with ori- Spray pattern: Hollow Cone Fog,
fice diameters of 1.02mm to 3.05mm nearly as fine as P Series
Male connection Spray angles: 90° standard
(120° available by special order)
Metal
Flow rates: 0.534 to14.7 l/min

Hollow Cone 90° MISTING
Fog Pattern
Dimensions are approximate. Check with BETE for critical dimension applications.

L Flow Rates L Dimensions
Hollow Cone, 90° Spray Angle, 1/8" and 1/4" Pipe Sizes, BSP or NPT BSP or NPT
High Pressure Operation Spray
LITERS PER MINUTE @ BAR recom. for Metal Only Approx. Wt.
Male Dimensions Male Dimensions
Orifice (g)
Pipe Nozzle K 0.7 1 1.5 2 3 4 5 7 (mm) Pipe (mm)
Size Number Factor bar bar bar bar bar bar bar bar Dia. (mm) D H Size A B Metal
1/8 L40 0.638 0.534 0.638 0.781 0.902 1.11 1.28 1.43 1.69 1.02 610 305
L48 0.912 0.76 0.91 1.12 1.29 1.58 1.82 2.04 2.41 1.22 690 345 1/8" 28.4 14.3 17
or L54 1.21 1.01 1.21 1.48 1.71 2.09 2.42 2.70 3.20 1.37 760 380
L66 1.71 1.43 1.71 2.09 2.42 2.96 3.42 3.82 4.52 1.68 910 455
1/4 L80 2.46 2.06 2.46 3.01 3.48 4.26 4.92 5.50 6.51 2.03 1200 600 1/4" 33.3 14.3 21
L120 5.54 4.63 5.54 6.78 7.83 9.59 11.1 12.4 14.7 3.05 1500 750
l
Flow Rate ( min ) = K bar
Standard Materials: Brass, 303 Stainless Steel, 316 Stainless Steel, and PTFE (L40, L48, L54 not available in PTFE)
Spray angle performance varies with pressure. Contact BETE for specific data on critical applications. Call for the name of your nearest BETE representative. CALL 413-772-0846

www.BETE.com 73