Page 52 - Catalogo de Boquillas - Industrysystem

MicroWhirl
®

Fine Atomization

DESIGN FEATURES SPRAY CHARACTERISTICS
Outstanding atomization Mist at low pressure; fog at
Rugged pinless design high pressure
Drip-free performance Spray pattern: Cone-shaped Fog
70 micron polypropylene filter Flow rates: 0.032 to 1.413 l/min
Safety wire hole available
Patented design
Minimum operating pressure 7 bar

1/8 NPT or BSP 1/4 NPT or BSP 3/8-24 UNF Dimensions (mm)
Pipe A B
MISTING 1/8 12.3 11.1
Size

1/4
14.3
17.5
Fog 3/8- 10.8 12.7
Shown with optional 1.59mm (1/16) diameter safety wire hole 24UNF
Dimensions are approximate. Check with BETE for critical dimension applications.
MicroWhirl Flow Rates and Dimensions
Fogging, 70° Spray Angle, 1/8 , 1/4 BSP or NPT or 3/8 - 24 UNF Pipe Sizes

LITERS PER MINUTE @ BAR
Male Pipe Nozzle K Wt
Size Number Factor 7 20 40 70 100 140 170 200 (g)
bar bar bar bar bar bar bar bar
MW085 0.0122 0.032 0.055 0.077 0.102 0.122 0.145 0.160 0.173

MW105 0.0151 0.040 0.068 0.096 0.127 0.151 0.179 0.197 0.214
1/8
or MW125 0.0180 0.048 0.081 0.114 0.151 0.180 0.213 0.235 0.255 7.09
1/4
0.272
0.093
0.175
0.209
0.247
0.132
0.0209
0.296
MW145
0.055
specify pipe size, connection type, nozzle number, spray angle, and material. 3/8 -24UNF MW275 0.09988 0.105 0.177 0.251 0.332 0.396 0.469 0.517 0.560
or
0.366
0.281
0.074
MW195
0.235
0.0281
0.126
0.397
0.178
0.332
0.0396
0.836
0.264
1.302
1.413
MW695
1.182
0.999
0.632
0.447
Nominal Angle
20° 70°
Atomization Level
TO ORDER: Flow Rate ( l/min ) = K bar mist light fog fine, heavy fog
Pattern with increasing pressure from nozzle
Standard Materials: 303 and 316 Stainless Steel, Polypropylene filter and Viton O-ring seal* (*supplied for 3/8 -24 UNF connection)
Spray angle performance varies with pressure. Contact BETE for specific data on critical applications.
70 www.BETE.com