Page 50 - Catalogo de Boquillas - Industrysystem

SF

Snap Release Nozzle System

DESIGN FEATURES SPRAY CHARACTERISTICS
Nozzles can be quickly changed and Quick Set-up System can be provided
aligned by hand without tools with fan, hollow or full cone spray tips
Full 45° alignment of spray without tools
Clamp-on adapter fits any style nozzle More SF Nozzle Systems:
FAN Quick set-up system features special Full Cone: page 31
Snap-in tips
Hollow Cone: page 48
Polypropylene, resistant to most acids
Flow rates: 1.61 to 75.6 l/min
and alkalies
Spray angles:
Double clamp base or adapter available Fan: 40°, 50°, 65°, 80°, 95° Snap-In Fan Tip
for higher pressure operation Hollow Cone: 50°, 65°, 90°
Full Cone: 35°, 65°, 80°
SNAP-IN
Flat-Fan
B
Nozzle Tip

A
50° Fan Single-
Clamp
Base
SNAP-IN
45° Double-Clamp Threaded Swivel Ball Retainer Cap
CLAMP-ON ADAPTER Adapter Available with 1/8 , 1/4 , 3/8 , 1/2
Available for 1 , 1-1/4 , 1-1/2 and 2 pipe. NPT or BSP Female threads
Available with 1/8 , 1/4 , 3/8 , 1/2 NPT female threads;
or 1/8 BSP female threads
Available with single or double clamp.
TO ORDER ADAPTER
Specify: Pipe Size, thread size, thread type, Single-Clamp
Adapter
number of clamps, materials.
SF Flow Rates and Dimensions
SF Fan 40°, 50°, 65°, 80° and 90° Spray Angles 1 , 1-1/4 , 1-1/2 and 2

LITERS PER MINUTE @ BAR bar bar Approx. Pipe Body O.D. Dim. (mm) Wt.
specify pipe size, connection type, nozzle number, spray angle, and material. SF10 80° 13.68 1.61 1.91 2.28 3.22 3.94 5.09 6.03 7.20 2.0 1-1/4 blue 33.40 83.8 43.2 62.4
Orifice
Pipe
Available
Approx.
0.7
1
K
3
7
5
10
Nozzle Spray
2
Dia.
0.5
Size
bar
B
(mm)
bar
bar
(g)
bar
bar
Number
Color (mm)
bar
Angles
A
Factor
2.277
1
4.55
6.44
2.8
4.556
3.22
7.89
10.2
14.4
12.1
SF20 65°
3.81
21.6
3.6
6.832
18.1
42.16
SF30 65°
15.3
11.8
86.4 48.3
62.4
red
6.83
4.83
9.66
5.72
6.44
7.62
SF40 65°
24.1
20.4
28.8
15.8
9.109
12.9
9.11
4.0
11.40
purple 48.26
36.1
30.2
9.54
1-1/2
8.06
62.4
11.4
19.7
91.4 50.8
SF50 40° 50° 65°
16.1
4.4
25.5
4.8
43.3
23.7
9.67
30.6
13.7
19.3
11.4
SF60 50° 65° 80° 95°
36.2
2
62.4
13.4
16.00
green 60.33
94.0 55.9
SF70 50° 80°
11.3
5.2
50.6
27.7
42.3
35.8
22.6
16.0
60.3
19.1
6.4
SF100 50°
50.9
22.8
16.1
32.2
22.7
72.0
39.4
Flow Rate (l/min) = K bar
TO ORDER: NOTE: Drill 16.7mm (21/32 ) hole in pipe to install SF.
Standard Materials: Polypropylene, 302 Stainless Steel clamp, EPDM seal.
Optional Materials: Viton seal.
NOTE: Maximum recommended pressures for SF assemblies: With single clamp 5 bar for 1 pipe; 3.5 bar for 1-1/4 and 1-1/2 pipe; and 2
bar for 2 pipe; with double clamp up to 10 bar.
Spray angle performance varies with pressure. Contact BETE for specific data on critical applications.
68 www.BETE.com