Page 62 - Catalogo de Boquillas - Industrysystem

XA Components & Options

2XA9890
SPRAY EXTENSIONS Gasket MATERIALS
The spray setup can be moved away Bodies, Fluid Caps, Air Caps,
from the nozzle body by using Hardware Assemblies, Mounting
optional 152mm or 305mm Hardware
extensions. These allow the spray to The standard materials for the XA
be moved closer to the target while series are nickelplated brass and
keeping the nozzle body and 303 and 316 stainless steels. Other
associated piping at a distance. 2XA9886B - 3/4 BSP metals and plastics can be supplied
2XA9886 - 3/4 NPT
2XA9889
Locking nut on request. See page 12 for a
MOUNTING HARDWARE
XA02 with Thin Wall 02 Adapter complete material list.
In many XA installations the nozzle Air Cylinders
is supported by the rigid metal pipe Thick Wall 01 Adapter The air cylinders used for XA
that supplies air or liquid. There are Similar in design and function to the hardware assemblies E and F have
several components which can Thin Wall Adapter, but intended for rods and cylinders made of stainless
provide support for the XA Bodies use with tanks or ducts with walls steel and end caps made of
when it isnt appropriate to suspend that are thick enough (10mm or anodized aluminum. All metal
the nozzle from piping; for example, over) to be drilled and tapped for a parts in contact with the spray
AIR ATOMIZING the air and liquid will be supplied Minimum wall thickness The standard material for XA
when the nozzle will spray through
3/4 NPT thread.
liquid are 316 stainless steel.
the wall of a tank or duct, or when
Seals
through flexible tubing. All XA
gaskets is compressed fiber with a
bodies except the XA03 can be used
neoprene binder. For installations
with any of the mounting hardware
requiring FDA approval, SBR
described here.
gaskets are available. Other
Thin Wall 02 Adapter
Threepiece adapter used to support
materials can be supplied on
an XA nozzle with the body located elastomeric and metallic gasket
request.
XA02 with Thick Wall 01 Adapter
outside a tank or duct having a The standard material for Orings
relatively thin (less than 10mm) wall Mounting Bracket 03 Adapter in XA automatics is Viton®. Other
and the spray directed into the This bracket is used in combination materials available on request.
interior. To use this adapter, a 27mm with a Thin Wall Adapter to support
diameter hole must be drilled an XA nozzle from a 13mmdiameter
through the wall. This adapter both metal rod. The bracket allows
secures the air cap and attaches the flexibility in aiming the spray.
nozzle body to the tank wall.
specify pipe size, body style, spray set-up #, hardware and mounting assemblies, and material. See page 78. into any number of lance XA03 Mounting

BETE can fabricate XA nozzles
Bracket
assembly variations

TO ORDER: Automatic XA nozzles in a

manifold configuration used for
coating a very wide product
Spray lance (see pages 18, 19) with a right angle XA
and quick-connect fittings

80 www.BETE.com