Page 61 - Catalogo de Boquillas - Industrysystem

XA Components & Options

AUTOMATIC OPERATION must be used when the air cylinder Solenoids for Non-Automatic

For critical applications which operates at a different pressure from XA Nozzles.
require automatic, nodrip, or high the atomizing air or where the Twoway solenoid valves can be
speed spray shutoff, the XA can be atomizing air is supplied below 2 bar. used to stop and start the flow of air
supplied with an aircylinder NOTE: The XA00 Square and XA03 and liquid to any nonautomatic
operated shutoff or cleanout/shut Bodies used for nonautomatic operation XA nozzle.
off. These air cylinders provide virtu can also be used, with hardware assem FILTERS, REGULATORS
ally instantaneous liquid shutoff at blies E or F, for automatic operation. AND STRAINERS
rates of up to 180 cycles per minute. Special design features allow field
The air cylinders require a minimum of upgrading to automatic operation. For optimum reliability, every XA
2 bar. Hardware Assemblies for nozzle should have a strainer and
Bodies for Automatic Operation Automatic Operation regulator in the liquid feed line and a
The XA01 and XA02 Round Bodies E. AirOperated Shutoff. Removal filter and regulator in the air feed
are rugged, highly reliable, and well of air pressure to the cylinder causes line. Every XA nozzle with a Siphon
suited to the rigors of highcycle a springloaded poppet valve actua Feed Setup should have a filter and
automatic operation. They have been tor to shut off liquid flow. regulator in the air line. The size and
designed to simplify the feed piping F. AirOperated Cleanout/Shutoff. type of each of these components
required for installing automatic noz Operation similar to E, but includes depends on the application, and can
zles by providing a constant location a cleanout needle. be determined by your BETE sales
for the air inlet piping. With their SOLENOID VALVES representative. BETE maintains an
neat, professional appearance, they inventory of filters, strainers, and
are particularly recommended for Electrically operated solenoid valves regulators that can be supplied with AIR ATOMIZING
OEM applications. can be used to control the operation your XA nozzle to ensure reliable
The XA01 Round Body has one of any XA nozzle. BETE can supply operation. These components can be
inlet for air and one for liquid. Be solenoid valves matched to your purchased individually or in kit
cause the air inlet supplies air for specific application. form.
both cylinder movement and liquid Solenoids for Automatic
atomization, spraying during start XA Nozzles.
up and shutoff is not as crisp and A 3way, quickexhaust solenoid
precise as with the XA02. The XA01 valve is required to operate the E or
body cannot be used with atomizing air F hardware assembly. The valve is
pressure under 2 bar. located in the line that supplies air to
The XA02 Round Body has two the cylinder, as close to the nozzle as
inlets for air and one inlet for liquid. possible. Independent control of the
One of the air inlets supplies the atomizing air of an XA02 or square
cylinder and the other supplies body requires an additional 2way
atomizing air. The XA02 body solenoid valve.

Simple piping and robust design describe Corrosion-resistant XA in PVC Call for the name of your nearest BETE representative. CALL 413-772-0846
this multiple nozzle XA lance.

The XA06 manifold body can be
fitted with up to five nozzle
setups and is often used for
humidification of large areas.

www.BETE.com 79