Page 30 - Catalogo de Boquillas - Industrysystem

SF

HOLLOW CONE DESIGN FEATURES SPRAY CHARACTERISTICS
Snap Release Nozzle System

Nozzles can be quickly changed and
Quick Set-up System can be provided
aligned by hand without tools
with fan, hollow or full cone spray tips
Full 45° alignment of spray without tools
Clamp-on adapter fits any style nozzle
Quick set-up system features special
More SF Nozzle Systems:
Snap-in tips
Full Cone: page 31
Polypropylene, resistant to most acids
Flow rates: 2.42 - 72.1 l/min
and alkalies
Spray angles:
Double clamp base or adapter Flat Fan: page 68 Double Clamp
Adapter with
Spiral Nozzle
available for higher pressure operation Fan: 40°, 50°, 65°, 80°, 95°
Hollow Cone: 50°, 65°, 90°
Full Cone: 35°, 65°, 80° SNAP-IN
Hollow Cone Nozzle Tip
CLAMP-ON ADAPTER
B Available for 1, 1-1/4, 1-1/2 and 2 pipe.
Available with 1/8, 1/4, 3/8, 1/2 NPT
female threads;
A or 1/8 BSP female threads
Available with single or double clamp.
TO ORDER ADAPTER Specify: Pipe Single-
Clamp
Size, thread size, thread type, number Base
45° of clamps, materials.
2.1 SNAP-IN Retainer Cap
Threaded Swivel Ball
Available with 1/8, 1/4, 3/8, 1/2
NPT or BSP
Female threads

Double-Clamp
Adapter
Single-Clamp
Adapter

Dimensions are approximate. Check with BETE for critical dimension applications.
specify pipe size, connection type, nozzle number, spray angle, and material. Nozzle Spray Factor 0.50.71 235 710 Pipe Body Dim. (mm) Wt.
SF Flow Rates and Dimensions
SF Hollow Cone 50°, 65° and 90° Spray Angles 1, 1-1/4, 1-1/2 and 2
LITERS PER MINUTE @ BAR
Approx.
Available
K
bar
Angle
bar
Number
bar
bar
Size Color A B (g)
bar
bar
bar
bar
5.92
SF15HC
1 blue 83.8 43.2 62.4
10.8
7.64
9.04
4.83
90°
2.86
2.42
3.416
3.42
SF58HC
50°
9.35
1-1/4 red 86.4 48.3 62.4
13.22
11.113.218.722.929.635.041.8
1-1/2 purple 91.4 50.8 62.4
65°
22.79
16.119.122.832.239.551.060.372.1
SF100HC
2 green 94.0 55.9 62.4
Flow Rate (l/min) = K bar
TO ORDER: Standard Materials: Polypropylene, 302 Stainless Steel clamp, EPDM seal.
Optional Materials: 303 Stainless Steel clamp, Viton seal.
NOTE: Drill 16.7mm (21/32) hole in pipe to install SF.
NOTE: Maximum recommended pressures for SF assemblies: With single clamp 5 bar for 1 pipe; 3.5 bar for 1-1/4 and 1-1/2 pipe; and 2
bar for 2 pipe; with double clamp up to 10 bar.
48 www.BETE.com