Page 27 - Catalogo de Boquillas - Industrysystem
P. 27
TF
Wide Range of Flows and Angles
DESIGN FEATURES SPRAY CHARACTERISTICS
The original spiral nozzle invented by Wide range of flow rates and spray angles
BETE and continuously improved! Fine atomization HOLLOW CONE
High energy efficiency Spray patterns: Hollow Cone
One-piece/no internal parts For Full Cone, see page 20
Clog-resistant performance Spray angles: 50° to 180°
High discharge velocity Flow rates: 2.26 to 10700 l/min
180° Metal
Male connection standard; female (Higher flow rates available)
connection available by special order
Hollow Cone 50° (N) Hollow Cone 120° (W) Hollow Cone 180° (XW) 50°, 60°, 90°, 120° 180°
Dimensions are approximate. Check with BETE for critical dimension applications
TF Hollow Cone Flow Rates and Dimensions
Hollow Cone, 50° (N) , 60° (V) , 90° (M), 120° (W), and 180° (XW) Spray Angles, 1/4" to 4" Pipe Sizes, BSP or NPT
PTFE not Metal Only
recommended above Approx. (mm)
Available above red line green line
Male Spray LITERS PER MINUTE @ BAR Free Dim. (mm) for Wt. (g)
Pipe Nozzle Angles K 0.5 0.7 1 2 3 5 10 20 Orif. Pass. Metal Only* 180°
Size Number 50° 60° 90° 120° 180° Factor bar bar bar bar bar bar bar bar Dia. Dia. A B C Metal Plas.
TF6 50° 60° 90° 120° 3.19 2.26 2.67 3.19 4.5 5.5 7.1 10.1 14.3 2.38 2.38 42.9 14.3
1/4 TF8 50° 60° 90° 120° 180° 5.93 4.19 4.96 5.93 8.4 10.3 13.2 18.7 26.5 3.18 3.18 47.6 14.3 47.6 35 21
TF10 50° 60° 90° 120° 180° 9.12 6.45 7.63 9.12 12.9 15.8 20.4 28.8 40.8 3.97 3.18 47.6 14.3 47.6
TF12 50° 60° 90° 120° 180° 13.7 9.7 11.4 13.7 19.3 23.7 30.6 43.2 61.1 4.76 3.18
TF14 50° 60° 90° 120° 180° 18.5 13.1 15.4 18.5 26.1 32.0 41.3 58.4 82.6 5.56 3.18 1
3/8 47.6 17.5 47.6 50 21
TF16 50° 60° 90° 120° 180° 24.2 17.1 20.2 24.2 34.2 41.8 54.0 76.4 108 6.35 3.18
TF20 50° 60° 90° 120° 180° 37.6 26.6 31.5 37.6 53.2 65.1 84.1 119 168 7.94 3.18
TF24 50° 60° 90° 120° 180° 54.9 38.8 46.0 54.9 77.7 95.1 123 174 246 9.53 4.76
1/2 63.5 22.2 60.5 85 25
TF28 50° 60° 90° 120° 180° 75.2 53.2 62.9 75.2 106 130 168 238 336 11.1 4.76
3/4 TF32 50° 60° 90° 120° 180° 95.7 67.7 80.1 95.7 135 166 214 303 428 12.7 4.76 69.9 28.6 76.2 85 28
TF40 60° 90° 120° 180° 153 108 128 153 216 264 341 483 683 15.9 6.35
1 92.1 34.9 92.2 425 85
TF48 60° 90° 120° 180° 217 153 181 216 306 375 484 685 968 19.1 6.35
TF56 60° 90° 120° 180° 294 208 246 294 416 509 657 930 1320 22.2 7.94
1 1/2 TF64 60° 90° 120° 180° 385 272 322 385 545 667 861 1220 1720 25.4 7.94 111 50.8 111 851 170
TF72 60° 90° 120° 180° 438 309 366 438 619 758 978 1380 1960 28.6 7.94 Call for the name of your nearest BETE representative. CALL 413-772-0846
2 TF88 60° 90° 120° 180° 638 451 534 638 902 1110 1430 2020 2850 34.9 11.1 143 63.5 127 1300 227
TF96 60° 90° 120° 180° 806 570 674 806 1140 1400 1800 2550 3600 38.1 11.1 176 63.5 127 1530 255
3 TF112 60° 90° 120° 1170 825 976 1170 1650 2020 2610 3690 5220 44.5 14.3
219 88.9
TF128 60° 90° 120° 1550 1090 1290 1550 2190 2680 3460 4891 6920 50.8 14.3
4 TF160 60° 90° 120° 2390 1690 2000 2390 3380 4140 5350 7570 10700 63.5 15.9 257 114
l
1
Flow Rate ( min ) = K bar 25.4 mm for 180° Large plastic Spirals (above 2") should not be operated above 1 bar
*Dimensions are for bar stock, cast sizes may vary.
Standard Materials: Brass, 316 Stainless Steel, PVC, Polypropylene, and PTFE (Poly. not available for TF6 - TF10)
TF8 and TF 24 150° are Factory Mutual approved. Contact BETE for more information.
Spray angle performance varies with pressure. Contact BETE for specific data on critical applications.
www.BETE.com 45